Light Switch Replace on Fairlanes
-
All 1963-67 Fairlane
1. Disconnect battery ground cable.
2. Remove control knob and shaft by pressing knob release button on switch housing,
with knob in full "ON" position. Pull knob out of switch.
3. Unscrew mounting nut, remove switch, then remove fuse block from switch.
4. To install, connect fuse block to switch, position switch
in instrument panel and install mounting nut.
5. Install knob and shaft by inserting it all the way into switch
until a distinct click is heard. In some in-stances it may be
necessary to ro-tate shaft slightly until it
engages switch contact carrier. 6. Connect battery cable.
1968-69 Fairlane
1. Disconnect battery ground cable.
2. To remove control knob and shaft assembly, place knob in full
ON position, then press knob release button on switch
and pull out knob and shaft.
3. Unscrew mounting nut and remove bezel and switch, then
remove junction block from switch.
4. Reverse procedure to install. However, install knob and shaft by
inserting all the way into the switch until a distinct click is heard.
In some instances it may be necessary to rotate the shaft
slightly until it engages the switch contact carrier.